π«
Issue raised
The equipment has been flagged, removed from normal use, and the responsible team has been notified.
π Standard weekly checklist
Check all mast flange bolts and climbing frame pins are fully torqued and secure
PASS
FAIL
Check jib and counter-jib chord members and lacings for cracks or deformation
PASS
FAIL
Check slewing ring gear teeth and bearing for wear, pitting or unusual play
PASS
FAIL
Check all wire ropes along full length for broken wires, kinks or corrosion
PASS
FAIL
Check all sheaves and pulleys for wear and correct rope seating
PASS
FAIL
Check hook block, swivel and safety latch for wear and freedom of movement
PASS
FAIL
Check hoist drum and rope anchorage
PASS
FAIL
Check all electrical connections, control panel and cab instruments
PASS
FAIL
Check lubrication of slewing ring, wire ropes and all grease points
PASS
FAIL
Check anchorage and tie-in frames to structure are secure and undamaged
PASS
FAIL
Confirm weekly inspection record is signed and filed
PASS
FAIL
π Standard checklist
Check mast, jib and counter-jib for structural damage or deformation
PASS
FAIL
Check all wire ropes for wear, kinks or broken strands
PASS
FAIL
Check hook block and safety latch
PASS
FAIL
Check all limit switches β hoist, derricking and slewing
PASS
FAIL
Check rated capacity limiter / load indicator is operational
PASS
FAIL
Check anti-collision system is operational (if fitted)
PASS
FAIL
Check anemometer / wind speed indicator is reading correctly
PASS
FAIL
Check all tower bolts and pins are secure
PASS
FAIL
Check slewing ring for damage or unusual noise
PASS
FAIL
Check operator cab controls are functional and labelled
PASS
FAIL
Check radius and load chart is in cab and legible
PASS
FAIL
Check emergency stop functions correctly
PASS
FAIL